What To Do When Instant Pot Says Burn

Must Try

Browned Bits Were Not Scraped Off Properly

How to Deglaze Your Instant Pot – What to do When it Says Burn

I make a lot of meats that require searing the meat first. When you do this, browned bits will adhere to the bottom of the pot. If you dont deglaze the pot properly before moving on to the pressure cooking phase, the pot will give the burn notice. To prevent this, make sure you scrap up all the browned bits before turning on the pressure cook.

When The Instant Pot Is Too Hot

Thankfully, your Instant Pot tends to alert you immediately if the bottom of the inner pot is so hot that the food is either burning, or likely to burn. This usually happens in two ways:

  • By displaying a message saying burn or OvHt
  • By alerting you with a beeping sound to draw your attention if youre not looking at the display

Issue #: Steam Is Escaping Your Instant Pot Via The Knob Or Your Sealing Ring

If your instant pot knob is turned to venting instead of sealing, it will release the steam instead of building the pressure it needs to build. This can dry out the water in your pot necessary for proper pressure cooking, as well cause the bottom of the pot to get too hot, triggering the burn notice.

Also, if your sealing ring is not properly in place, or if its damaged or has food stuck on it, this could also trigger a burn warning for the same reason as the knob.

Read Also: What To Do If Your Instant Pot Says Burn

What To Do If Instant Pot Says Burn

  • Email
  • Aplikasi Lainnya

What To Do If Instant Pot Says Burn. What to do when the burn sign comes on once the burn sign is on, you need to press the cancel button, then switch the instant pot to venting mode so that it releases the pressure. Next, make sure the steam release is sealed.

Time cooking time as it says on the recipe and then do quick release or natural release as per the recipe. Why does it say burn? If you see the burn message on your instant pot, take the following steps: After releasing the pressure, carefully open instant pots lid. The burn warning is one of them.

What Is The Instant Pot Burn Message

What To Do When Your Instant Pot Says BURN + Video

If you have encountered the Burn message on the display screen, it certainly doesnt mean that your food is burnt or ruined or you need to make something else now.

It simply means that the Instant Pot has detected that a very high temperate at the bottom of the pot and thus the burn warning.

The Instant Pot comes with a lot of safety mechanisms. The burn warning is one of them. The Instant Pots thermal sensors are automatically monitored and controlled. Thus when the inner pot reaches temperatures that are very high, the sensors sense the high temperature and shut off the heat displaying a burn message.

Once things cool down, the heating element turns back on and tries to complete the cooking program however, this burn warning is displayed 5 mines max before the cooker shuts down and returns to standby.

Burnt Rice in Instant Pot

Recommended Reading: Instant Pot Thaw Ground Beef

How To Prevent A Burn Message In The Future

There are a few simple steps you can take to make sure you never have this issue again. First, make sure there is enough liquid in the pot. Instant Pots rely on water-based liquid to pressurize properly and if the food is too dry it will begin to overheat. Next, make sure the steam release is sealed. The machine will not be able to reach proper pressure if the release isnt sealed. Another helpful step is to layer the ingredients within the pot. Make sure liquids are on the bottom, then layer in the restwithout mixing. This will help to prevent scorching. Finally, make sure that the sealing ring and float valve are working properly.

The more familiar you get with your Instant Pot, the more confident youll become cooking with it.

Steam Escaping Via Sealing Ring

When the silicone sealing ring on the instant pot lid is not properly installed, steam may escape when the pressure cooking mode is on.

To function properly, a pressure cooker must be properly sealed to prevent steam from escaping.

Any issue with the sealing ring will cause a lot of cooking steam to escape so basically, there wont be enough liquid in the pot. Without any liquid, the food inside may start to get dry and this might trigger the burn warning.

Common causes of steam escaping through the sealing ring include a broken or damaged ring, lid not properly closed, food debris stuck on the sealing ring, thus preventing the ring from closing properly, and you might have forgotten to install the sealing ring back after cleaning.


  • If the sealing ring is old, damaged, or broken, consider getting a replacement
  • Always ensure that the sealing ring is properly installed before cooking
  • Make sure that all the components of the instant pot are present, including the sealing ring
  • Clean the lid properly and remove any food debris stuck on around the ring
  • Don’t Miss: Frozen Meatball Recipes Instant Pot

    Release Pressure In Instant Pot

    how to kill a water scorpion The burn message simply means that the instant pot has detected that the inner pot has gotten too hot, so it stops heating to prevent your food from burning. Next, make sure the steam release is sealed. You need to saute the thighs first, then remove them onto a plate, deglaze the bottom of the pot by adding required liquid and scraping it with a wooden spoon, then placing a trivet inside and arranging the. Make sure sealing ring is in place

    How Do You Get Burn Marks Out Of A Instant Pot

    What to Do When You Get the BURN NOTICE! Instant Pot Tips

    Instructions Combine the baking soda and water in the stainless steel insert. Lock the lid and adjust pressure cook time to 5 minutesas if you were cooking something! Use the natural pressure release setting when finished. When finished, the stuck on food should be lifted and floating around in sudsy water.

    Don’t Miss: How To Defrost Ground Meat Quickly

    What Is Instant Pot Burn Message

    The Burn Message on Instant Pot simply means theres an Instant Pot Overheat Error.

    Instant Pot has a built-in burn-protection mechanism that prevents users from burning food in the Instant Pot.

    So, when it detects a high temperature at the bottom of the inner pot, the burn-protection mechanism suspends heating. This often means the bottom layer is overcooked and getting dry.

    This is when you would see the Burn Message or Ovht Error on the screen display.

    How To Clean The Burnt Inner Pot On Your Instant Pot

    If you do get the Instant Pot burn error message, chances are that there is burning on the bottom of your inner pot. Now, you can wash and clean this using water but there is another method you can use. This will get it clean easily and quickly.

    This method actually utilizes the remains of the inner pot. The first thing we will do is to press the Saute button on the front panel. This will start to heat up the base of the Instant Pot.

    We will then add some hot water to the inner pot. Using a silicone or wooden spoonideally one with a flat bottom, we will scrape the bottom of the pan.

    The heat from the bottom as well as the hot water should make removing the residue at the bottom very easy.

    Essentially, this process is called deglazing and is something that is referred to a lot on Instant Pot cooking. Under normal circumstances, you would use the deglazing process to add to the flavor of the dish. In this case, the food is burnt so we need to remove it out of the inner pot.

    Don’t Miss: How To Cook Frozen Tamales In Instant Pot

    Recipe For A Different Size Instant Pot

    As you would expect, not everybody has the same size Instant Pot. However, it wont stop people from following the recipe regardless of the size they have.

    So, for example, if the recipe is for a 6-quart Instant Pot but you have an 8 quart, you may not have enough liquid in there. You need to compensate for each recipe if it is not directly the same size Instant Pot.

    How To Avoid Burn Messages:

    Instant Pot Burn Message

    There are a few ways you can avoid the Instant Pot burn issue.

    • Pot in Pot cooking with the Instant Pot is just putting another container inside the pressure cooker to contain your food. As long as there is enough water in the pot, you cant get a burn notice with pot in pot cooking because theres no food touching the inner pot or the heating element underneath.
    • You wont get a burn warning when using pot in pot cooking methods. Recipes like my lasagna, breakfast casserole, hard boiled eggs for egg salad, and even Starbucks egg bites are all examples of pot in pot cooking.
    • Another way you can avoid the burn Instant Pot warning is by adding extra liquid. If your recipe consistently gives you a burn warning, you should adjust it to include more thin cooking liquid.
    • Low pressure cooking is another way to keep the Instant Pot from saying burn. You can use low pressure cooking for just about anything, its just a matter of adjusting the time to compensate. The Pressure Level button on your Instant Pot will let you select your desired pressure level.
    • The heating temperature is also reduced when you cook on low pressure on an Instant Pot so make sure you double check the internal temperature of your food when adjusting the pressure settings.
  • Make sure your sealing valve is closed. If the sealing valve is left open the pot will try to heat and pressurize, but will eventually overheat.
  • Layer ingredients and dont stir the foods that often stick.
  • You May Like: Can You Put The Instant Pot Lid In The Dishwasher

    What Does Instant Pot Food Burn Message Mean

    The Instant Pot burn message is part of the built-in safety measures that help prevent the unit from overheating and causing for to burn.

    This message usually occurs during the middle of a cooking cycle, which can be frustrating and lead to delays because the unit will stop cooking once this message is displayed.

    Lets take a look at some of the most common reasons for the food burn Instant Pot message, and then Ill give you some tips for how to proceed when the Instant Pot says burn!

    Why Does The Instant Pot Burn Message Happen

    Usually, the Burn message occurs when food becomes stuck to the bottom of the cooker.

    Other reasons include:

    • You haven’t added enough water or thin liquid to your dish.
    • You’ve placed solid foods such as meat directly onto the bottom of the pot.
    • Your sealing ring is not in place.
    • You didn’t deglaze your cooker after using the Sauté function.

    You May Like: How To Cook Frozen Cabbage Rolls In Instant Pot

    More Instant Pot Tips

    Did you know we have entire Youtube channel dedicated to healthy Instant Pot recipes and tips? My goal is to help you become confident with your Instant Pot by demonstrating each delicious foolproof recipe in step-by-step videos.

    Make sure to subscribe and hit the Bell icon not to miss new videos.

    The information on this website is for educational purposes only. It has not been evaluated by the FDA and is not intended to diagnose, treat, prevent, or cure any disease. You assume full responsibility and liability for your own actions.

    This page may contain affiliate links. Please see our disclosure policy. ifoodreal.com is a participant of Amazon Services LLC Associates Program. If you make a purchase, we will receive a small commission at no extra cost to you. It helps keep iFOODreal recipes free. Thanks for your support!

    The Pot May Be Faulty

    Instant Pot Burn Message

    If youve followed all the rules mentioned above but are still getting the instant pot burn message, there is a likelihood that its actually faulty.

    Please keep in mind that this is not something that happens all the time. If youre constantly experiencing it, its probably not your fault. The unit might be faulty.


    Get in touch with Instant Pots customer service. If the fixes they provide fail to work, they may request you to return it and exchange it for you.

    You May Like: Can You Put The Instant Pot Lid In The Dishwasher

    Steam Escaping Via Venting Knob After Forgetting To Turn It Into Sealing Position

    Instant Pot has a steam release and seal knob that releases and seals in the steam when pressure cooking.

    In the event you forget to seal the hole with the knob, all the steam from the pot will escape and this means one thing- the food will start to burn since there is not enough liquid in the pot.

    The burn instant pot message will instantly appear as a warning and will automatically stop the instant pot from heating any longer.


    Every time you start pressure cooking, always turn the venting knob into the sealing position. This will ensure that no steam is lost and that you dont risk burning the meal you worked so hard to prepare.

    Instant Pot Food Burn What To Do

    Instant Pot Food Burn What To Do. Check the bottom of the pot & remove any burnt food content in the instant pot. Make sure sealing ring is in place We remember the first few times we panicked only to realize that our food actually didnât burn. After releasing the pressure, carefully open instant potâs lid.

    how to be beautiful without makeup First, make sure there is enough liquid in the pot. The more steam you lose the more it will burn. A good rule of thumb is to have at least one cup of liquid for every recipe. How to avoid burn message on instant pot? The burn message simply means that the instant pot has detected that the inner pot has gotten too hot, so it stops heating to prevent your food from burning. Start with a total of 1 cup of water and see if that avoids the burn message. Use hot pads to remove the inner pot from the base. You need to saute the thighs first, then remove them onto a plate, deglaze the bottom of the pot by adding required liquid and scraping it with a wooden spoon, then placing a trivet inside and arranging the.

    You May Like: Why Does My Instapot Say Food Burn

    How To Save A Dish That Gets A Burn Message

    Once the overheat protection setting is triggered, the machine will shut off, cool itself down and start up again. The good news is no matter what youre making, you can fix it. Your best bet is to cancel the program, quickly release the steam, then remove the inner pot. Take a look at your food and remove anything that looks scorched or burnt. Check to make sure there isnt anything on the heating element and that the machine is working properly, then add some extra liquid and get cooking again. Here are other Instant Pot mistakes you can avoid, too.

    How To Prevent A Burn Notice In The Future

    7 Instant Pot Burn Mistakes You Need to Avoid in 2020 ...
    • Scrape before you seal: Scrape up all the browned bits left in the pot after sautéing food and before closing the lid.
    • Double-check your parts before you close up the pot for cooking. An improperly sealed lid can cause the Instant Pot to just cook and cook your contents as it attempts to reach pressure. This will lead to scorching and then a burn notice.
    • Make sure that youre using enough liquid. Our recipes take the amount of liquid necessary for the machine to function into account, but someone else’s recipe might not.

    Also Check: What To Do When Instant Pot Says Burn

    How To Recover From A Burn Notice

    If the problem was one of your machine’s components, then fix the issue, reseal the pot, and set it to cook for the time you had left. You can set a separate timer when you start your Instant Pot to keep track of this, or do what I do if I dont have a clue how much time is left: guess. I subtract a minute or two to account for the pot heating the contents as it comes back up to pressure. Then, hope for the best. Luckily the environment inside an Instant Pot is so moist that food will not dry out as readily.

    If it was a food issue, stir everything to recombine, scrape up any browned bits on the bottom of the pot, and add a small amount of water a half cup worked for me, though you might need a little more, depending on how dry it is inside the pot. Seal the pot and try again.

    Mistake #: Steam Is Leaking From Silicone Sealing Ring

    When steam is leaking like below photo, it means the Instant Pot isnt properly sealed.

    Similar situation as Mistake #5 above more liquid than necessary escaped from the pot as steam, so there was not enough liquid in the pot.

    4 Common Causes for Leaking Steam From Sealing Ring:

    • Forgot to place sealing ring back into the lid
    • Sealing ring is damaged, cracked
    • Food debris attached to the sealing ring
    • Lid was not closed properly

    *Pro Tip: Same issue can happen with the Floating Valve if steam leaks for over 2 mins, check the Floating Valve & its silicone seal for food debris, damages, or if the silicone seal is seated properly.

    Read Also: How Long To Cook Pre Cooked Ribs In Instant Pot

    Latest Recipes

    More Recipes Like This